Comments on: Mailbag: E1 – F5 Fault Code on a Kenmore Range

By: lwelcome

lwelcome — Tue, 23 Nov 2010 02:44:09 +0000

ok the E1 F5 door in locked position 4 days before Thanksgiving. OUCH ! Kenmore error message. Disconnected and reconnected power, no go. So we called the appliance company where we bought the stove. The price for them to come out was to expensive. We first fliped the breaker to the stove to off, then pulled the stove out, unpluged the stove, took off the back, figured out where the cam for the door was, on our stove left side. Moved the cam which moved the rod which is somehow connected to front door. Opened, error message gone, we will never use self cleaning again. Make sure you disconnect all power, we flipped the breaker and pulled the plug. We did not reconnect until the back was screw on again.

By: filterit

filterit — Tue, 17 Jan 2006 17:10:37 +0000

After calls to Sears and lengthy research on the net, I was able to fix the E1-F5 error code on my Kenmore range. This appeared after a normal self-clean cycle and the unit remained locked. Remove the back panel (after unplugging) and unhook all connectors and harnesses. What ever combination I used worked, and the unit reset and unlocked. Replace panels, and relax knowing you just saved over $200!

By: jmagmo1

jmagmo1 — Wed, 30 Nov -0001 00:00:00 +0000

What if your Kenmore appliance is showing this code and there is no door latch???

By: Molly

Molly — Wed, 30 Nov -0001 00:00:00 +0000

our self cleaning Kenmore oven is showing a error sign in the window that it shows us digitally what the temperature is when we hit bake, it shows f3. Our model # is 9118369180 and our serial # is 0 or D and then f64425. We are thinking maybe it needs cleaned but we are not sure how to run that cycle, can you be of some help?

By: Samurai Appliance Repair Man

Samurai Appliance Repair Man — Wed, 30 Nov -0001 00:00:00 +0000

Loads of help for everyone at the Appliantology Group repair forum.