Comments on: Fisher Paykel Dishwasher, DD602, Won’t Start http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/ Your appliance repair weapon of mass instruction for all your appliance repair needs! Fri, 12 Mar 2010 05:09:31 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: Blueline http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-312 Blueline Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-312 I too had this problem, after replacing the switch I got two wash cycles out of the drawer then got a F7 code. What if anything did I do/not do to cause this and what is the fix. I had to unplug the power "line" wire harness to stop the constant beeping. Any thoughts and thanks in advance. I too had this problem, after replacing the switch I got two wash cycles out of the drawer then got a F7 code. What if anything did I do/not do to cause this and what is the fix. I had to unplug the power “line” wire harness to stop the constant beeping. Any thoughts and thanks in advance.

]]> By: Samurai Appliance Repair Man http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-313 Samurai Appliance Repair Man Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-313 Best case is a broken hardware communications link from the console to the motor microprocessor. This could be a bad wire harness, or maybe you misplaced one of the wire harnesses on the motherboard.<BR/><BR/>Worst case is a crashed control board = gotta buy a new one. Best case is a broken hardware communications link from the console to the motor microprocessor. This could be a bad wire harness, or maybe you misplaced one of the wire harnesses on the motherboard.

Worst case is a crashed control board = gotta buy a new one.

]]> By: Anonymous http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-314 Anonymous Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-314 My Fisher Paykel makes a loud sort of grinding noise during the first cycle. It sounds terrible. Any thoughts what it might be? My Fisher Paykel makes a loud sort of grinding noise during the first cycle. It sounds terrible. Any thoughts what it might be?

]]> By: Samurai Appliance Repair Man http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-315 Samurai Appliance Repair Man Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-315 You probably have some gookus stuck in the impeller. Pull off the spray arm and unlock the wash impeller assembly retaining ring. The whole assembly pulls right out. Look for deformations in the impeller vanes and/or gookus in the volute. You probably have some gookus stuck in the impeller. Pull off the spray arm and unlock the wash impeller assembly retaining ring. The whole assembly pulls right out. Look for deformations in the impeller vanes and/or gookus in the volute.

]]> By: Walt http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-316 Walt Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-316 Can you suggest where I can find a replacement for the "drawer limit Switch" that doesn't cost an arm and leg?..thanks Can you suggest where I can find a replacement for the “drawer limit Switch” that doesn’t cost an arm and leg?..thanks

]]> By: Samurai Appliance Repair Man http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-317 Samurai Appliance Repair Man Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-317 Try buying directly from Fisher Paykel. You could also try to match up the switch at an electronic supply house. Try buying directly from Fisher Paykel. You could also try to match up the switch at an electronic supply house.

]]> By: Noah http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-318 Noah Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-318 have DD603 Paykel Fisher dishwasher...one month old...Lowes has service man coming maybe next week when they can find one in our area...problem..washing both drawers and got F1 for flood switch activated.....lids didn't close..overflowed anyway...water on the floor...had to cut power at circuit breaker to stop F1 flashing....is there any way to reset this malfunction?...I am not impressed with the P & F drawer design...not worth the $1500 price tag. have DD603 Paykel Fisher dishwasher…one month old…Lowes has service man coming maybe next week when they can find one in our area…problem..washing both drawers and got F1 for flood switch activated…..lids didn’t close..overflowed anyway…water on the floor…had to cut power at circuit breaker to stop F1 flashing….is there any way to reset this malfunction?…I am not impressed with the P & F drawer design…not worth the $1500 price tag.

]]> By: Anonymous http://fixitnow.com/wp/2005/06/10/fisher-paykel-dishwasher-dd602-wont-start/comment-page-1/#comment-319 Anonymous Thu, 01 Jan 1970 00:00:00 +0000 http://fixitnow.com/wp/?p=828#comment-319 Have a DD603 Fisher Paykel dishwasher. No service in our area. Dishwasher won't drain and then leaks all over the floor. Any suggestions. Have a DD603 Fisher Paykel dishwasher. No service in our area. Dishwasher won’t drain and then leaks all over the floor. Any suggestions.

]]>