If you’ve accidentally switched the oven control on your GE oven from Fahrenheit to Celsius (or vice versa), it can seem like an oven control problem; the keypad will accept some temperature selections and not others. Easy enough to switch back to the way you want it– this excerpt from your owner’s manual explains the technique:
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Celsius selections.
Press the BAKE and BROIL HI/LO
pads (on double oven models use
the upper oven controls) at the same
time for 3 seconds until the display
shows SF.
Press the BROIL HI/LO pad. The
display will show F (Fahrenheit).
Press the BROIL HI/LO pad again. The
display will show C (Celsius).
Press the START pad.
NOTE: On double oven models the new setting
will be displayed for both ovens.
You may also like...
- Basic Troubleshooting Kata for Electric Ovens
- How to Re-Calibrate the KitchenAid Dual-Fuel Ranges
- “My Oven Temperature is Out of Whack”
- Appliance Tip of the Day: Oven Temperature Sensors Demystified
- Understanding the Temperature Control Circuitry in a Jenn Air Range
- Electrical Outlets for Electric Ovens, Ranges, and Stoves
- Oven Temperature Sensors
- Whirlpool / KitchenAid Microwave Combination Built-In Ovens with Error Code “door”
- Troubleshooting a Whirlpool DSI gas range: no bake, no broil, no spark; replaced DSI board, no change
- How to fix a gas oven that won’t fire up, won’t get hot, won’t keep temperature, or goes BOOM when/if it does fire up





You must log in to post a comment.