Attention Maytag and Amana Refrigerator Owners

by Samurai Appliance Repair Man on November 7, 2003

in Ice Maker Repair,Refrigerator Repair


If you own a Maytag or Amana refrigerator with an ice and water dispenser in the door, keep reading. Amana and Maytag have used a Y-connector in their refrigerator water supply tubing. This connector brought two water lines into one, and is located right after the fill valve. The Y-connector can be in the icemaker or chilled water lines, or both. This connector has had problems with leaking and, even worse, breaking and is now no longer available.

To eliminate this potential flood hazard from your fridge, come git you this Maytag valve kit or this Amana valve kit. Problem solved!

Related posts:

  1. Mailbag: Amana Refrigerator Freezing Everything
  2. Amana Refrigerator, Less Than Four Years Old, DOA and Amana Won’t Honor the Warranty
  3. Maytag or Amana 19-20-22 Cu. Ft. Bottom-Mount Refrigerator Control Console Disassembly
  4. Mailbag: Amana Washer Leaks
  5. Maytag recalls 1.6 Million Refrigerators
  6. Mailbag: Slow Flow from a Refrigerator Water Dispenser
  7. Water Dispenser in a Maytag Refrigerator Floods the Kitchen
  8. GE Profile Refrigerator Leaking from the Water Dispenser
  9. Maytag Ice2O French Door Refrigerator/Freezer Model MFI2568AEW HV Control Board Repair Instruction Guide
  10. Amana SBIE20TPW fridge: troubl…

Bookmark and Share

{ 1 comment… read it below or add one }

ugotzeus August 14, 2006 at 1:06 pm

Excellent advice and on the money. My Y connector broke exactly as you depicted.
Is there another Y connector that’s on the market as an alternative to discarding the existing dual inlet valve and spending another $40?
Also, if purchasing the new part you recommend, what other tubing, connectors, etc. are required to restore the ice maker water flow?
Zeus

Previous post:

Next post: