Maytag or Amana 19-20-22 Cu. Ft. Bottom-Mount Refrigerator Control Console Disassembly

If you have one of those Maytag or Amana bottom-freezer refrigerators, at some point you’ll have to disassemble the control console mounted in the ceiling of the beer compartment (same place where you set the temperature). One common example for why you may need to do this is to replace the cold control (thermostat), or the defrost timer / ADC board (depending on how yours is equipped). This page shows you how.

You may also like...

1. Replacing the freezer door rail slides in an Amana-built, bottom-mount refrigerator: A photo odyssey
2. Maytag French Door “ICE-2-0” with Bottom Mount Freezer: Ice dispenser door continually opens and closes and/or display flashes on and off
3. Mailbag: Amana Refrigerator Freezing Everything
4. How to Replace the Adaptive Defrost Control (ADC) Board in your Maytag or Jenn-Air SxS Refrigerator
5. Mailbag: Refrigerator Runs Constantly
6. Maytag-JennAir Side by Side Refrigerator with a Block of Ice in the Bottom of the Freezer Compartment
7. Blown Fuse on a Maytag Neptune Motor Control Board
8. Frigidaire Side-by-Side Refrigerator: Erratic Temperature Control on the Fridge Side; Replacing the Control and Damper Assembly
9. Maytag Ice2O French Door Refrigerator/Freezer Model MFI2568AEW HV Control Board Repair Instruction Guide
10. Amana Refrigerator, Less Than Four Years Old, DOA and Amana Won’t Honor the Warranty