Samurai Appliance Repair Man,

I have a front-loading Kenmore wash machine that is about six years old. The tub would not drain so I replaced the drain pump, the coin trap, and the drain hose. That solved the drain problem but a week later the water was back on the floor. I looked in the parts manual that came with the machine and decided it must be the O-Ring that seals the front and rear shells.

I need a real service manual for this job and the folks at Sears were absolutely worthless in helping me with finding the proper manual. I am searching the web trying to find information on how to approach this job. I am asking for some guidance on validating that this is the most likely cause of the leak and tips for how to approach the repair. Thanks in advance for your time and assistance.

Rick L.

_______________________________
The above message was sent when you were offline, via your Timpani site.

Message sent from IP: 65.40.126.96

No model number given but a six year old, Kenmore front-loading washer will be a Friggidaire-built machine. Here’s the service manual for this washer.

You may be further nourished by my uplifting and inspiring sermon on common leak sources in the Frigidaire-built front loading washer.

Lock n’ load, Budrow!