--- jared wrote:
> 
> Oven broke:
> My Tappan (model 12-1062-30)automatic pilotless
> ignition oven stopped heating. I disassembled it to
> find what looks like the oven igniter assy that
> promptly glows but does not "fire-up" the oven. 
> Does this need to be replaced?  Or could it be
> something else?   Thanks for your help,  My daughter
> can smile again once we can toss pizza back in the
> oven
> Cheers
> Jared
> 
> _______________________________
> The above message was sent when you were offline,
> via your LivePerson site.
>  
> Message sent from IP: 64.172.96.241

The ignitor may be bad. But before you just cross your fingers and change it, you can find out for sure by measuring the current draw of the ignitor using a clamp-on amp meter. This page explains the current draw specifications for the ignitor and where to measure it. If you need help on how to use a clamp-on amp meter to measure current, this page will help with that.

Once you confirm the ignitor is bad, you can order a new ignitor here using your model number.