Whirlpool-Kenmore Direct-Drive Washer with a Lazy Spin

by Samurai Appliance Repair Man on November 28, 2006

in Washer Repair

If you have a Whirlpool or Kenmore direct-drive washer with a weak or lazy spin which gets worse with a heavier load, it may have a bad clutch or transmission. How’s a grasshopper to know which it is? Fret thou not, my leetle seeker of arcane appliance wisdom, for this topic in the Samurai Appliance Repair Forum offers some excellent diagnostic advice from seasoned Master Appliantologists and will gently guide you to appliance enlightenment.


You may also like...

  1. Intrepid Apprentice Conquers a Whirlpool / Kenmore Direct Drive Washer with a Lazy Spin
  2. Diagnosing and Repairing Spin and Agitate Problems in a Whirlpool / Kenmore Direct Drive Washer
  3. Whirlpool-Kenmore Direct-Drive Washer: No Spin, No Pumpy, No Nuttin’; Secret Samurai Trick Revealed
  4. Mailbag: Whirlpool/Kenmore Direct Drive Washer Suspension Springs
  5. Appliance Tip of the Day: Replacing the Drive Coupler on a Whirlpool (or Kenmore) Direct Drive Washer
  6. How NOT to Replace the Drive Coupler in Your Kenmore or Whirlpool Direct-Drive Washer
  7. How to tell when the drive block is worn out in your Whirlpool or Kenmore direct-drive washer
  8. Re-installing the Gear Case in a Whirlpool / Kenmore Direct Drive Washer
  9. Is it Worth Replacing a Broken Coupler on a Whirlpool or Kenmore Direct Drive Washer?; washer repair
  10. Common Repairs on a Whirlpool / Kenmore Direct Drive Washer

Previous post:

Next post:

Real Time Web Analytics