Author Archives: Samurai Appliance Repair Man

Venting a Dryer into the Attic

Question: We are building a new house. Want to put in stackable washer and dryer. Can we vent dryer through ceiling into attic or does it need to go out side wall?

_______________________________
The above message was sent when you were offline, via your Timpani site.

Message sent from IP: 4.131.127.104

Ahh, this reminds me of a limerick me Papa-san used to tell me when I was but a whelp:

There once was a yankee from Natick
Who vented his dry’r in the attic
But the attic grew moist
And the black mold rejoic’t
So he fled from his home in a panic.

Thank you, thank you very much. I’m here all week. Tell your friends. 8)

Meet the Appliantology Masters

Need help with an appliance problem? The Samurai Appliance Repair Forum is where you’ll get it. And not just from other appliance repair virgins like yourself. Nay, nay, young Grasshopper, perish the thought! At the Samurai Appliance Repair Forum, you’ll get expert, personalized help from real-life Master Appliantologists. Come, meet some of them. Then join the forum and suckle the pure milk of appliance repair wisdom like a lame calf at your mother’s swollen teat!

For Those About to Rock, We Salute You!

MESSAGE SENT THROUGH YOUR WEBSITE

IP Address: 71.66.225.228

name = Laura
country =   USA
comments = Your site, for lack of better vocabulary, ROCKS! I just replaced my ancient GE dryer’s belt thanks to you! I don’t have much to donate, but you can get a sixpack at least. Depends, I suppose, on where you’re buying the beer lol. Anyway, Thanks for such an awesome, informative, amusing site!

MESSAGE SENT THROUGH YOUR WEBSITE

IP Address: 216.196.162.30

name = Sonya
country =   USA
comments = You have helped me fix my washing machine twice, my frig/freezer, and now my dryer! Thanks for your help and this great website for d.i.y.’s (in other words…those too poor to afford a repair person).

You rock!

MESSAGE SENT THROUGH YOUR WEBSITE

IP Address: 69.163.225.136

name = Tony
country =   USA
comments = You rock! All I needed was the secret sequence of magical mechanical invocations to make my washing machine become putty in my hands, and your site provided it in seconds. My clothes are completing their previously stalled cycle as I write this. It’s people like you that make the Internet great!

THANKS MAN!

Appliance Rock

Motherboard Recall on GE Refrigerators

A motherboard on a refrigerator? Aren’t those only used in computers? The common sense answer is, “They should be.” But GE, in it’s never-ending quest to produce ever more frail appliances using cheesy electronic control boards made in Chinese prison factories, uses a motherboard on a refrigerator to replace several robust mechanical parts such as cold controls and defrost timers. The end result? A refrigerator that requires a proprietary (and, naturally, expensive) handheld computer to diagnose the motherboard (or muthaboard, as you’ll come to call it), is more convoluted to troubleshoot, and has a much higher failure rate.

How much higher of a failure rate? Well, enough so that GE had to issue a mea culpa letter to GE servicers:

Recent analysis has discovered a potential problem with the main circuit board on a limited number of refrigerator models, which could lead to lower than anticipated life expectancy on that component. Therefore, if the main circuit board fails, GE Consumer & Industrial will replace this part free of charge to the consumer until further notice.

Awww, ain’t that sweet? They’re actually gonna cover the cost of replacing the muthaboard in that joke of refrigerator that you paid too much for. How about all the food you lost? And what about all the time you spent on the phone with GE waiting to get someone who spoke English only to be told, “You’ll need to call a GE authorized servicer. I can give you the name of one near you.”

The letter goes on to list all the GE models included in this de facto recall. You can read the saga of one hapless GE owner in this topic at the repair forum. One of the Academy Fellows, Pegi, posted the notice letter from GE, which lists all the models included in the recall. Look for it. Be there now.

To learn more about your refrigerator, or to order parts, click here.

Tired Mom Fixes Her Kenmore Washer

Oh Great Samurai, I am most indebted to your great wisdom and guidance. The husband (who is totally repair disabled) and I (who repairs because there is no other option) replaced the drive coupler on our Kenmore washer in about an hour. Your diagrams and tips were right on, and the fact that I can go back to washing the ten million loads of laundry my sweet children gift me daily is most rewarding. One interesting tip is that we used a couple of wood blocks (my son’s toy box type) to hold up the motor. It made putting the couplers back together much easier. Many thanks and blessings.

_______________________________
The above message was sent when you were offline, via your Timpani site.

Message sent from IP: 65.11.213.177

Congratulations on your successful repair, my worthy apprentice. Good repair tip, too. Domos and blessings back atcha. 8)

Maytag Announces Massive Dishwasher Recall

2.3 million Maytag and Jenn Air dishwashers are being recalled for a very real fire risk. Apparently, the rinse aid dispenser can leak onto internal wiring causing an electrical short circuit and, in some cases, fire. It’s already happened to 135 unhappy Maytag owners. You could be next! More info here.

This recall comes right on the heels of Whirlpool’s recent purchase of Maytag. Interestingly, Whirlpool investors don’t seem too concerned– Whirlpool stock just keeps going up. I wouldn’t buy any just yet, though.

The iPhone Is No Smartphone

After all the initial iPhone mania wore off, the real scoop on the latest gadgetronic offering from Apple is starting to emerge:

The iPhone Is No Smartphone: “

Apple’s iPhone was the talk of the town after its January 9 launch. Industry observers were by and large impressed with the new device, praising its user interface, innovation and seamless integration. But two senior ABI Research analysts — wireless research director Stuart Carlaw, and principal mobile broadband analyst Philip Solis — point out that while the iPhone is undoubtedly clever and capable, it is not correct to call it a smartphone, as much of the media has done.

ABI Research defines a smartphone as a cellular handset using an open, commercial operating system that supports third party applications. The iPhone runs the Apple Macintosh computer operating system, OS X, so at first glance it would seem to fall into the smartphone category, which might help justify its announced $500+ price tag. But, says Solis, ‘It turns out that this device will be closed to third party applications. Therefore we must conclude at this point that, based on our current definition, the iPhone is not a smartphone: it is a very high-end feature phone.’

Feature phones’ functionality (dictated by the software which controls the hardware) is closed and controlled by an operator or the device manufacturer, whereas smartphones are supported by a third-party ecosystem, where competition in the software space creates applications that add value. ‘Sure,’ concedes Solis, ‘feature phones have third party applications too — but these are relatively weak and limited applications that work with the middleware such as Java and BREW. Applications designed for smartphones can be written to access core functionality from the OS itself, and are therefore usually more powerful and efficient. The competition in an open environment also yields more cutting edge, rich applications.’

Stuart Carlaw adds, ‘Consumers will not be willing to settle for a second-rate cell phone just to have superior music. Apple must get the phone engineering part of the equation right, and it is difficult to see how they will accomplish that with no track record in the industry. Even though they are working with some prominent suppliers, the task of putting all of the building blocks together cannot be underestimated.'”

(Via APPLIANCE Magazine :: Breaking News.)

Complete Listing of All Error Codes for All Thermador Cooking Products

It’s an all-you-can-eat error code buffet on Thermador cooking products! Come and git it: sooo-WEEE!

In order to download the error code file, you’ll need to be an Apprentice Appliantologist in the Samurai Appliance Repair Forum. All your other friends are doing it. How ’bout you?

For more tidbits and insight into Thermador error codes, read this repair forum topic.

Official Legal Notice: Terms of Service (TOS) for Fixitnow.com

Be it known to all ye present…

By using Fixitnow.com or other Samurai Appliance Repair Man websites (“Samurai Sites”), you agree to be bound by the following terms and conditions pursuant to the Common Law of Erasmus (c.1530):

Be thou not a weenie. For weenies belong not in civil conversation but rather roasting over a warm blaze, spitting and sizzling with oozing fat.

Turn away when spitting lest your saliva fall on someone. If anything purulent falls on the ground, it should be trodden upon, lest it nauseate someone.

To lick greasy fingers or to wipe them on your coat is impolite. It is better to use a tablecloth or the serviette.

Some people put their hands in the dishes the moment they sit down. Wolves do that.

You should not offer your handkerchief to anyone unless it is freshly washed. Nor is it seemly, after wiping your nose, to spread out your handkerchief and peer into it as if pearls and rubies might have fallen out of your head.

Do not be afraid of vomiting, if you must; for it is not the vomiting but holding the vomit in your throat that is foul.

All Samurai Sites are subject to this disclaimer. Caveat Reader.

If you cannot swallow a piece of food, turn around and discreetly throw it somewhere.

Do not move back and forth in your chair. Whoever does that gives the impression of constantly breaking wind or trying to break wind.

Retain the wind by compressing the belly.

How To Remove the Tub in a Whirlpool Duet / Kenmore HE Washer

This excellent little video from Whirlpool Corporation shows how to tear down and remove the tub in a Whirlpool Duet washer (the Kenmore HE3t / HE4t is the same machine but with a "Kenwhore" label slapped on it). Oh, I know what you're saying, "Gee, Samurai, that's real nice an' all, but how likely is it that I'm gonna need to remove the tub in my new $1,000 washing machine?" Well, Mary B. didn't think it was very likely either until her washer’s tub self-destructed and she was left holding ye olde colostomy bag.

Since removing the tub requires a complete tear down of this machine, the procedure illustrated here has application to many other repairs, such as replacing the tub shocks.

Other resources:

Genuine Whirlpool service manual for this washer.

To learn more about your washing machine, or to order parts, click here.

How to Know When to Replace the Drum Rollers in Your Amana Dryer

If your dryer rumbles and bumbles when you run it, then you probably need to replace the drum rollers. This page will help you take the dryer apart so you can check ’em out.

If your drum rollers look like this:

Dryer Drum Roller: Nuked

…then you need new rollers. Come git you some.

Actually, that’s one of the worst cases of roller wear I’ve seen. The rollers are also bad if they’re stiff or if they make a chattering sound when you spin ’em with your fingers.

These rollers are sold individually. As long as you’re going to the trouble to replace one, go ahead and replace the other one for just a few bucks more because it’s not long for this world. So buy two.

You’ll also need these snap ring pliers to remove the snap ring that holds the drum roller on the shaft. And you’ll like this service manual for Amana dryers.

How to Replace the Brushes in a Frigidaire Front Loading Washer Motor

Brush failure in these motors is the most common cause for motor failiure. A new motor costs about $200; new pair of brushes about $60. The real kick in the shorts is that Frigidaire does NOT sell the brushes separately! BTW, this also applies to Kenmore washers built by Frigidaire. (If you believe there is an actual Kenmore factory somewhere cranking out Kenmore appliances, you need to read this now.)

Unbunch thy panties, Grasshoppah, for the Samurai is here to save you wads of hot, wet, stinky cash! And here’s some more good news: replacing motor brushes is a snap, less than two mugs on the world-famous SUDS-o-meter!

The brushes are located on the back of the motor (that is, the opposite end from the motor shaft). Looky here (click the picture for illustrative annotations):

Frigidaire Washer Motor Brushes

Just remove the obvious phillips screws and install the new brushes.

“But, mighty and myopic Samurai, how can I get the replacement brushes if Friggidaire is attempting to screw me over by not selling them because they want me to by a whole new motor for a lot more money?”

Good question, Grasshopper, it warms my heartburn to see you thinking so hard. Careful though– you might get a hernia in your brain. Obviously, I have the solution or I wouldn’t be writing this silly post. Use these Asko brushes:

Asko Washer Motor Brushes

Yes, I said Asko. Turns out these Asko motor brushes work great in Frigidaire washer motors, too.

Motor brushes are sold individually and you should always replace ’em in pairs, so buy two. Conveniently, you can buy the new brushes ratcheer.

To learn more about your washing machine, or to order parts, click here.

Where Have All the Tradesmen Gone?

When was the last time you tried to hire a skilled and competent tradesman? Seems you either can’t get anyone to call you back or the ones that you can reach you wished you hadn’t. Why is that, Capt. Ron? As usual, the Samurai has the answer. Open your skull and let the light of wisdom shine inside that empty space betwixt your ears.

I’ve been saying for years that there are just too many over-indulged, pampered progeny going to college. The ample supply of easily-available, low-interest, government-backed student loans has spawned hordes of puffy little cherubs trotting off to college ostensibly for “higher learning” but who actually spend most of their time in laboratory studies of intemperance and concupiscence. This is when “college” becomes “collitch.”

As Charles Murray, at the American Enterprise Institute (a group usually too neo-connish for my tastes), correctly points out:

Government policy contributes to the problem by making college scholarships and loans too easy to get, but its role is ancillary. The demand for college is market-driven, because a college degree does, in fact, open up access to jobs that are closed to people without one. The fault lies in the false premium that our culture has put on a college degree.

For a few occupations, a college degree still certifies a qualification. For example, employers appropriately treat a bachelor’s degree in engineering as a requirement for hiring engineers. But a bachelor’s degree in a field such as sociology, psychology, economics, history or literature certifies nothing. It is a screening device for employers. The college you got into says a lot about your ability, and that you stuck it out for four years says something about your perseverance. But the degree itself does not qualify the graduate for anything. There are better, faster and more efficient ways for young people to acquire credentials to provide to employers.

The “over-educated idiot” is a cliché in our overindulged society. We all know people who went to collitch, graduated with a degree in something like African Percussion Interpretation but, hmmm, just can’t seem to find a job. Either that or they hate their job and feel stuck working for Da Man and so lash out by voting to take Da Man’s money through taxation, government-mandated minimum wage increases, or various other hare-brained wealth-redistribution schemes right out of Marx’s imbecilic Manifesto.

So why aren’t kids going into these trades? Simple: pretend you’re an overindulged 18 year-old snot-nosed punk with no clear vision of what you want to do with your life or what you would even study in collitch. In your 18-year old brain, your impression of working in the trades is to work for someone like Cheeky the Repairclown (or, worse yet, to end up like Cheeky!). And suppose that you had the choice of working for Cheeky or enjoying four years of drinking and carousing in collitch on someone else’s dime (i.e., low-interest, government-backed student loans, Mommy and Daddy, grants, etc.). Which would you choose?

Another problem is that parents have this goofy notion that their spawn has a “right” to go to collitch and, by God, to collitch they will go! Nevermind that the only thing this kid has any intention of studying is the bottom of his beer mug and his girlfriend’s chest.

The result is that the poor kid will struggle through collitch (in between parties) and then, if he’s lucky, end up in some miserable Dilbert job on a cubicle farm wishing he’d gone to work as an apprentice for Uncle Joe, a Master Electrician. He would have had his own Master Electrician license by now and been in a position to either buy Uncle Joe’s bidness or start his own. Guess that degree in Underwater Basketweaving wasn’t such a good investment afterall. Go figure.

But, despite not learning very much that matters during his collitch career, the kid will certainly pick up the usual collectivist claptrap from the last remaining Marxists on the planet, the collitch faculty, about how more gubmint is the answer to all our problems from global warming to jock itch. In most cases, collitch of today has devolved into nothing more than a factory cranking out swarms of government-loving, liberty-hating voters who don’t understand the free market and are actually scared to death of it. These are the people who will vote themselves, along with the rest of us, into slavery.

I have always maintained that these misguided souls would be much happier and wealthier learning a trade. Instead of all this spite, envy, and disgruntlement, these very same people could be living the good life as successful entrepreneurs running their own trade bidness and getting a taste of the Ameedican Dream.

What, exactly, is this Ameedican Dream of which I speak? It is running your own life the way you choose and controlling your own destiny. It’s having a work situation where the amount of moola you earn is dependent on your efforts and not on Da Man counting out the beans and saying, “You can have this many, the rest are mine.” In the Ameedican Dream, YOU Da Man! In today’s economy, the easiest way to get there is by running a bidness in one of the skilled trades.

According to my state-of-the-art prognostications, here are some of the trades I see as the most viable and valuable both now and in the forseeable future (in no particular order):

  • Plumber
  • Electrician
  • Nurse
  • Carpenter (rough and finish)
  • Mason
  • Pest Control
  • Diesel Engine Mechanic
  • Auto Technician
  • Industrial Equipment Technician

You may have noticed the conspicuous absence of appliance repair technician. I don’t consider appliance repair to be one of the long-term viable trades because the mega-trend for appliance repair techs has diminishing opportunities for an in-home service bidness; the shining exception will be servicing high-end appliances.

So, if you’re a collitch student majoring in Effing-Up, do the world and yourself a favor by dropping out and learning a trade instead. You’ll thank me in a few years.